amount, and the process is repeated. In order to build an object the controlling drawing for each layer changes very slightly.
Typical standard manufacturing methods are subtractive, that is material is removed from a base form by machining with a lathe, with a drill, by cutting, planing or broaching. By contrast 3D-printing is an additive process, because material is added, layer by layer.
1. PLM(제품수명주기관리) 시스템이란?
PLM 시스템은 제품에 대한 기획에서부터 설계 및 제조, 판매가 이루어지고 단종 되어 폐기될 때까지의 모든 일련의 과정에 대한 제품 데이터를 관리하는 것이라고 할 수 있다. 해당 과정에서 제품개발 프로세스에 대한 혁신이 이루어지고 이를 통하여 축적된 정보
본문내용
재료의 기계적 성질을 알아내는 가장 간단한 방법으로 재료 시험에서는 중요한 역할을 한다. 그러나 경도의 본질적인 물리적 의의는 현재까지 확립되어 있지 않다. 다만 경도에 관한 정의의 기초가 되는 것으로 다음과 같은 설명이 나와 있다. 즉 "어느 물체의 경도란 그 물체를 다른 물체로
in his if not "the big black", a system of cages in an enclosed space, in darkness. As a setting, lines of flight and a very baroque neon chandelier designed by Leo Carbonnier (photo Charles Duprat). "I work on the ground just like the artists of the past. However, the reasons differ, I am inspired by what produces the world today: Machiavellianism, discharge, psychopathy and s
material)에서도 기준의 적용이 가능하다.
(2) 취성재료의 파괴기준 (Fracture criteria for brittle material)
ⅰ. 최대수직응력기준 (Maximum normal stress criterion)
취성재료는 사전의 항복현상이 나타나지 않고 파단으로 갑자기 파괴되는 특성을 갖는다. 가량 단축 인장응력을 받는 경우, 그 부재가 파손되는 수직
materials
만약 용접의 길이의 5%이상의 폭이라면 재료사이의 공간을 연결할 수 없다. 슬릿(slit)의 폭에 따라서 결합되거나, 용접 선을 형성 할 수 없다. 따라서 용접과정에 따라서 wire가 공급되는 공정이 필요하다. Wire의 양은 용접속도, 용접길이, 폭에 따라 결정된다.
실제의 양을 제외하고 매우 얇은(d= 0
Significantly higher surface area and much narrower pore size distribution in the mesopore region
A large amount of amine-type CO2 capturing agent into its mesopores in a well dispersed manner
Synthesis of MA
PEI impregnation on MA
Amine grafting on MCM-41
Characterization of the materials prepared
CO2 adsorption-desorption measurement
Al(i-PrO)3 (41.68g)+ Alcohol solvent
(4) Double patterning
The double patterning is divided into four parts, leading with wafer requirements and then two sets of lithographic requirements (Generic Pitch Splitting - Double Patterning Requirements Driven by MPU metal Half-Pitch and Generic Spacer Patterning Requirements - Driven by Flash). The lithography requirements are different for each process; the requirements for pitch splitti
이렇게 급작스럽게 변화하는 시장 환경과 WTO 시대에 신속하게 대응하면서 소비자의 요구에 부합되는 고부가/고품질 제품을 빠른시간 안에 효율적으로 생산할 수 있게 하는 제품정보 관리시스템의 새로운패러다임은 2000년대에 들어서 PLM(Product Lifecycle Management) 으로 바뀌었다.
제조 기업의 제품 정보